Show Desktop Version

PI-230 (Glass-filled)

This glass-filled polyimide is exceptional in low-wear and low coefficient of friction conditions, in addition to a wide range of temperature tolerances––from 450º F up to 600º F continuously, and up to 750 F on occasion. Isomide PI 230 Data Sheet

A-4025-G (Carbon Graphite-filled PTFE)

A-4025-G is carbon/graphite-filled PTFE with improved thermal and electrical conductivity. Very low coefficient of friction, excellent wear resistance in dry and wet environments while maintaining PTFE’s excellent resistance to corrosion media. A- 4025-G is the best PTFE compound for bearings, flow meter gears, compressor packings, and oil-tool sealing-elements. A-4025G Data Sheet

PI-220 (20% Graphite-lubricated PI)

20% graphite lubricated compound offers low wear and low coefficient of friction under PV factors up to 130,000 in totally un-lubricated conditions. This has the same wide range of temperature tolerances as the other grades––from -450o F up to 600o F continuously, and up to 750o F on occasion. PI-220 Data Sheet

PI-210 (15% Graphite and 5% PTFE-lubricated PI)

15% graphite, 5% PTFE lubricated grade offering the lowest coefficient of friction of bearing and wear surface operation under extreme pressure and velocity over a wide range of temperatures––from cryogenic to 600o F continuously, going up to 750o F for short periods. PI-210 Data Sheet

PI-200 (15% Graphite-lubricated PI)

15% graphite lubricated composite with improved resistance to wear and low coefficient of friction. The choice grade for un-lubricated bearings, mechanical seals, thrust washers, and pistons over a wide temperature range––from – 450o F up to 600o F continuously, taking 750o F for short periods.\\\\ PI-200 Data Sheet

PI-100 (PI)

Unfilled base resin providing maximum mechanical properties, impact resistance and elasticity combined with electrical and thermal insulating characteristics. This compound covers a wide temperature range from -450o F to 580o F continuous with excursions to 750o F for short periods. PI-100 Data Sheet


T-230-AS is an anti-static fiber reinforced Polyamide-imide polymer product with thermal stability up to 500℉. The fiber reinforcement offers high stiffness and deformation resistance up to its maximum service temperature. The product provides suppression of electrostatic charging in test sockets, nests, and fixtures in semiconductor and electronic testing equipment. The static dissipative properties, stiffness at […]


48-ESD is a static dissipative Polyetheretherketone (PEEK) polymer product designed for static management applications requiring higher thermal performance in an ESD product up to 450-475 oF. The product maintains strength and stiffness and prevents discharge to or from human contact during assembly and packaging operations. 48-ESD is a compression molded, and fully annealed PEEK product […]


SEMIKON 42-ESD is an electrostatic dissipative Polyether-Sulfone (PES-OH) polymer product designed for static management applications up to 340℉ in the semiconductor and solar-cell industries. The filler package in the Polyetherimide resin imparts high strength and stiffness over a wide temperature range while preventing discharge to or from human contact. Semikon 42-ESD is a compression molded, […]


Polyether-Sulfone (PES-OH) polymer product designed for use in the semiconductor industry, offering electrostatic dissipation to preserve sensitive microchip integrity during assembly and manufacturing. The product offers consistent surface resistivity with no or very low initial charge through a wide range of temperatures up to 340℉  providing a path for an electrostatic charge to bleed-off. 41-ESD-CON […]