30% glass fiber reinforced, 1% PTFE. Designed for a metal replacement, this compound provides high stiffness and retention of properties at elevated temperatures. Typical applications include housings, brackets, compressor poppet valves, plates, pump impellers, rotors, and housings. The material is also excellent for electrical and thermal insulators. T-230 Data Sheet
Products
T-240-220 (20% Graphite-powder, 3% PTFE PAI (Low-load, high-speed))
PAI with 20% graphite powder, 3% PTFE. Designed for high-speed wear and friction applications similar to those of T-201, but with better wear performance in wear resistance. T-240-220 Data Sheet
T-247 (Special Bearing/Wear Grade PAI (High-load, low-speed)
Compression molded graphite and PTFE lubricated Poly(Amide-Imide) Polymer. For reciprocating notion bearings subjected to high loads at low speeds, T-247 offers the best wear resistance of the Symmtamide line in compressor and valve components. These applications include piston rings, mechanical seals, and rod packings. T-247 Data Sheet
T-201 (Bearing/Wear Grade PAI)
12% graphite-powder, 3% PTFE. Designed for bearing use, this compound provides good wear resistance, a low coefficient of friction, and high compressive strength. Typical applications for T-201 include: thrust washers, high-speed bushings, wear-pads, piston rings, and low torque valve seats. T-201 Data Sheet
T-203 (Unfilled PAI)
Symmtamide T-203 offers the best impact resistance and elongation of the Symmtamide family. The product is most suitable for electrical applications such as connectors, switches, relays, and insulators. T-203 Data Sheet
SM-695-01 (Ceramic Carbon-filled Fluoropolymer)
Perfluoropolymer-based compound reinforced with proprietary ceramics and fibers specifically designed for demanding applications. Compression molded parts and shapes offer superior thermal and mechanical performance up to 675°F and 10,000 psi. SM-695-01 is suitable for SAGD service components requiring high-temperature, high-pressure, and creep resistance in steam and hydrocarbon service. SM-695-01 Data Sheet
SM-650-HT (Polymer-Ceramic Filled Fluoropolymer)
Perfluoropolymer-based compound reinforced with polymer and ceramic fibers. SM-650-HT is designed for extreme conditions of temperature and pressure. Compression-molded parts and shapes offer superior sealing and wear performance. 650-HT has been tried and proven in steam-injection, oil-field equipment seals. SM-650-HT Data Sheet
SM-550-TFM-HT (PTFE Synthetic Mica Reinforced)
Fluoropolymer-based compound reinforced with mica, designed for demanding applications requiring dimensional stability. Compression molded parts and shapes offer superior thermal and mechanical properties making it suitable for extreme environment components requiring high-temperature, high-pressure, and creep resistance. Ideal for abradable seals for rotating & turbo- equipment. SM-550-TFM-HT Data Sheet
SM-35-G (PTFE/PPS Alloy Carbon-Fiber, Ceramic reinforced)
PPS filled PTFE reinforced with carbon fibers and proprietary fillers for improved mechanical properties. These compounds extend the application of PTFE to areas with higher pressure and temperature than previously provided by standard PTFE filled products. These materials are designed for seals of all sorts, compressor component wear pads, back-up rings, and applications where PTFE […]
SM-35-C (PTFE/PPS Alloy Carbon-Fiber reinforced)
PPS filled PTFE reinforced with carbon fibers and proprietary filled for improved mechanical properties. These compounds extend the application of fluoropolymers to areas with higher pressure and temperature than previously provided by standard PTFE filled products. These materials are designed for seals of all sorts, compressor component wear pads, back-up rings, and applications where PTFE […]